1. Switch on the main power switch, and check whether the power supply of the equipment is fed in normally and whether the power indicator light is on. Proceed to the next step after normal operation.
2. Close the power switch of each circuit and check whether it is normal. In the normal state: the equipment does not operate, the indicator light of the belt conveyor is off, the power indicator light of the inverter and other equipment is on, and the display panel of the inverter shows normal.
3. Start each electrical equipment in sequence according to the process flow. Start the next electrical equipment after the previous electrical equipment starts normally. In the operation of the belt conveyor, the provisions of the items in the design of the conveyed items must be observed, and the design capabilities of the belt conveyor must be observed. Secondly, it should be noted that all types of personnel must not touch the moving parts of the belt conveyor, and non-professionals should not touch electrical components, control buttons, etc. at will.
After the belt conveyor is running, it is not possible to open the inverter's rear stage. If it is determined that the maintenance needs, it must be carried out under the condition of stopping the inverter operation, otherwise the inverter may be damaged. The operation of the belt conveyor stops. Press the stop button to stop the main power supply after the system stops.
https://www.stordworkshop.com
